Hinges

Hinges

In this category you will find hinges in stainless steel A2 and A4 for hatches, doors, lids and flaps on board and in furniture: flat hinges in many shapes, stamped or as polished precision castings, hinges with cover, automatic hold function or thread, 180-degree hinges, piano hinges, two-part door hinges and weld-on hinges.

Items 121 to 134 of 134
ImageDescriptionItem no.DimensionMaterialUnitPriceDelivery timeBuy
Hinge, Art. 8930, 126 x 40 mm, stainless steel A489304126 40Length 126 mm, Width 40 mmA4 / V4APackaging unit: 2 pieces12,45 EUR per piece1 PU = 24,89 EUR3 to 5 working days
Hinge with thread, Art. 8931, 126 x 40 mm, M6 x 45 mm, stainless steel A489314126 40Thread M6, Length 126 mmA4 / V4APackaging unit: 2 pieces32,49 EUR per piece1 PU = 64,99 EUR3 to 5 working days
Hinge, Art. 8932, 127 x 65 mm, stainless steel A489324127 65Length 127 mm, Width 65 mmA4 / V4APackaging unit: 2 pieces24,15 EUR per piece1 PU = 48,29 EUR3 to 5 working days
Hinge with thread, Art. 8933, 127 x 65 mm, M6 x 45 mm, stainless steel A489334127 65Thread M6, Length 127 mmA4 / V4APackaging unit: 2 pieces41,26 EUR per piece1 PU = 82,51 EUR3 to 5 working days
Hinge, Art. no. 8952, 35 x 38 x 20 mm, stainless steel A28952235 38Length 35 mm, Width 38 mmA2 / V2APackaging unit: 4 pieces5,24 EUR per piece1 PU = 20,96 EUR3 to 5 working days
Hinge, Art. no. 8981, 135 x 27 mm, stainless steel A289812135 27Length 135 mm, Width 27 mmA2 / V2APackaging unit: 4 pieces5,87 EUR per piece1 PU = 23,47 EUR3 to 5 working days
Hinge, Art. no. 8982, 180 x 38 mm, stainless steel A289822180 38Length 180 mm, Width 38 mmA2 / V2APackaging unit: 4 pieces7,68 EUR per piece1 PU = 30,73 EUR3 to 5 working days
Hinge A4 Investment Cast Half-Round 64 x 81 mmSR-A4-64X81A4 / V4Asingle12,59 EUR per piece3 to 5 working days
Hinge A4 Investment Cast Long, approx. 30 x 152 mmSR-A4-30X152A4 / V4Asingle12,59 EUR per piece3 to 5 working days
Hinge A4 Investment Cast Trapezoidal Short, approx. 38 x 56 mmSR-A4-38X056A4 / V4Asingle8,09 EUR per piece3 to 5 working days
Hinge, short, rounded, stainless steel A23 versionsfrom 2,69 EUR per piece3 to 5 working daysAll versions
ca. 47 x 30 mmSR-RK047A2 / V2Asingle2,69 EUR per piece3 to 5 working days
ca. 75 x 40 mmSR-RK075A2 / V2Asingle3,59 EUR per piece3 to 5 working days
ca. 80 x 40 mmSR-RK080A2 / V2Asingle4,49 EUR per piece3 to 5 working days
Hinges, long, rounded, stainless steel A22 versionsfrom 2,69 EUR per piece3 to 5 working daysAll versions
ca. 75 x 20 mmSR-RL075A2 / V2Asingle2,69 EUR per piece3 to 5 working days
ca. 85 x 30 mmSR-RL085A2 / V2Asingle3,59 EUR per piece3 to 5 working days
Hinges, rectangular, stamped, A2, thickness 1.5 mm3 versionsfrom 3,20 EUR per piece3 to 5 working daysAll versions
ca. 80 x 70 mmSR15-80X70A2 / V2Asingle3,20 EUR per piece3 to 5 working days
ca. 80 x 80 mmSR15-80X80A2 / V2Asingle3,40 EUR per piece3 to 5 working days
ca. 100 x 100 mmSR15-99X100A2 / V2Asingle5,60 EUR per piece3 to 5 working days
Trapezoidal hinges with level offset, stainless steel A4 investment cast2 versionsfrom 9,99 EUR per piece3 to 5 working daysAll versions
ca. 37 x 54 mmSR-A4-37X054A4 / V4Asingle9,99 EUR per piece3 to 5 working days
ca. 37 x 70 mmSR-A4-37X070A4 / V4Asingle12,59 EUR per piece3 to 5 working days

Choosing and fitting the right hinge

Overview of designs

  • Flat hinges: rectangular, oval, round, semicircular or trapezoidal, as T-hinge, table hinge or heavy-duty version; trapezoidal hinges with an offset are intended for a difference in level.
  • Hinges with three leaves: in A2 or A4.
  • Hinges with snap-on cover: according to the manufacturer, you open the cover with a flat-blade screwdriver; further hinges with cover are also available.
  • Hinges with automatic hold function: for most versions the manufacturer specifies a constant torque over the entire range of movement.
  • Hinges with M6 thread: almost all sizes are also available without thread; the thread length is given for each version.
  • Piano hinges: drilled or undrilled, as a full length or per metre, in A2.
  • Two-part hinges: also as door hinge, in left-hand and right-hand versions; the separable engine hood hinge has a removable pin.
  • Weld-on hinges: in A2, two-part or three-part, some with removable pin.

Selecting size and design

Pay attention to length, width and pin diameter so that the hinge suits the load and the installation situation. With a piano hinge, also called a continuous hinge, a continuous pin connects the leaves; the hinge distributes the load evenly over its entire length and is therefore recommended for large doors, long cabinets and heavy panels. As the piano hinges are made of A2, they belong in dry interior spaces. Hinges with a removable pin make it easier to quickly take off doors and panels.

Sizing the automatic hold function correctly

A flap generates a moment at the hinge: weight force in newtons times the distance of the centre of gravity from the pivot axis in metres. The weight force is the mass in kilograms times 9.81. With a uniform panel, the centre of gravity lies at half the depth; the moment is greatest when the flap is horizontal. The sum of the minimum torques of all hinges, that is nominal value minus tolerance, must exceed this moment; torque and tolerance in Nm are given for each version. This applies if the hinges sit on one axis and carry the load evenly. Too much torque makes the flap stiff to operate, and thin sheets may need reinforcement. Keep the mechanism clean so that it works reliably.

Welding on and installation

After welding on, remove heat tint by brushing, grinding, blasting or pickling, as it promotes pitting corrosion. For screw fixing, use screws of the same grade as the hinge. You will find fasteners under hasps and toggle latches; for the basics on the grades, see the guide V2A, V4A or duplex on a boat.