Accessories
In this category you will find bolts and fastenings for doors, hatches, cabinet doors and drawers: slide bolts for surface or flush mounting, spring-loaded or with locking position, barrel bolts and spring bolts, door bolts with locking device, sliding locks, turn latches, rotary and concealed drawer fastenings, and cockpit locker catches in A4 or A2 stainless steel, some combined with plastic or nylon.



















Bolts and furniture fastenings for life afloat
Positive locking instead of friction locking
Catches hold doors by friction. Bolts and hooks engage behind a strike plate or profile and create a positive lock; they have to be released deliberately. On board, such fastenings prevent doors and drawers from flying open in rough seas or when the boat heels. The bolt must engage behind the counterpart in every position: heavily loaded drawers can otherwise slip it out from under the striking profile. A simple slide bolt that is not under tension can work itself loose; make sure it fits snugly. Heavy doors need a stronger bolt than light cabinet doors.
Designs at a glance
- Slide bolts for surface or flush mounting, spring-loaded, with cover or with locking in the open and closed positions; barrel bolts as polished investment castings or stamped, plus spring bolts.
- Door bolts with locking device: according to the manufacturer, the door is opened and locked with one hand by pressing the button and turning the handle.
- Sliding lock for flush mounting, according to the manufacturer well suited to plastic doors, with a rotatable bolt for outward or inward opening doors.
- Turn latches: a rotating lever that engages in a bracket or stop and so closes the hatch or frame.
- Cabinet door and drawer fastenings: according to the manufacturer, the rotary fastenings act as a stop against unintentional opening, while the concealed fastening closes by itself. In addition there are cockpit locker catches with strike plate.
Installation and care
The type of mounting, surface or flush, must suit the door; check the door thickness and cut-out size beforehand and hold the bolt in place as a trial. Where the manufacturer recommends specific countersunk screws, this is stated with the version. Lubricate bolts and springs at least twice per season. In the neighbouring categories you will also find flush handles with lock as well as ball catches and cabin hooks.
