Clamps
This category contains worm-drive hose clips in material classes W4 and W5 with band width 9 or 12 mm, swing bolt clamps in A2 and A4, retaining clips to DIN 3016 with rubber insert, and pipe clamps as half shell, full shell, double clamp and with swivel for pipe 22 and 25 mm.
| Description | Item no. | Dimension | Material | Unit | Price | Delivery time | ||
|---|---|---|---|---|---|---|---|---|
![]() | Swing bolt clamp, stainless steel A2 and A4144 versions | from 4,51 EUR per piece | 3 to 5 working days | All versions | ||||
![]() | Retaining clamp DIN 3016 with rubber insert, stainless steel A241 versions | from 0,95 EUR per piece | 3 to 5 working days | All versions | ||||
![]() | Pipe clamp, Item 8354, stainless steel A45 versions | from 0,85 EUR per piece | 3 to 5 working days | All versions | ||||
![]() | Pipe clamp, Item 8357, stainless steel A23 versions | from 2,59 EUR per piece | 3 to 5 working days | All versions | ||||
| doppelt, feststehend, für Rohr 25 mm, A2, VE 5 Stück | 83572FEST | For tube Ø 25 mm, Thickness 2 mm | A2 / V2A | Packaging unit: 5 pieces | 6,25 EUR per piece1 PU = 31,27 EUR | 3 to 5 working days | ||
| doppelt, mit Wirbel, für Rohr 25 mm, A2, VE 5 Stück | 83572WIRBEL | For tube Ø 25 mm, Thickness 2 mm | A2 / V2A | Packaging unit: 5 pieces | 7,94 EUR per piece1 PU = 39,70 EUR | 3 to 5 working days | ||
| einfach, für Rohr 25 mm, A2, VE 5 Stück | 83572SINGLE | For tube Ø 25 mm, Thickness 2 mm | A2 / V2A | Packaging unit: 5 pieces | 2,59 EUR per piece1 PU = 12,94 EUR | 3 to 5 working days | ||
| Double clamp heavy duty, 25 to 28 mm, stainless steel A2 | RS-S-1F | For tube Ø 25 mm, Diameter 24,9 bis 28 mm | A2 / V2A | single | 12,99 EUR per piece | 3 to 5 working days | ||
| Half-shell pipe clamp 25 mm, stainless steel A2 | RS25-HALB | For tube Ø 25 mm | A2 / V2A | single | 1,95 EUR per piece | 3 to 5 working days | ||
| Full-shell pipe clamp 25 mm, stainless steel A2 | RS25-VOLL | For tube Ø 25 mm | A2 / V2A | single | 1,99 EUR per piece | 3 to 5 working days | ||
![]() | Hose clips with band width 12 mm, W4, stainless steel A22 versions | from 1,11 EUR per piece | 3 to 5 working days | All versions | ||||
| Für Schlauch-Ø 16 bis 25 mm | W4-12X016-025 | Diameter 16 bis 25 mm | A2 / V2A | single | 1,11 EUR per piece | 3 to 5 working days | ||
| Für Schlauch-Ø 32 bis 50 mm | W4-12X032-050 | Diameter 32 bis 50 mm | A2 / V2A | single | 1,34 EUR per piece | 3 to 5 working days | ||
![]() | Hose clips with band width 12 mm, W5 stainless steel A419 versions | from 1,69 EUR per piece | 5 to 8 working days | All versions | ||||
![]() | Hose clamps with band width 9 mm, W4 stainless steel A28 versions | from 0,89 EUR per piece | 3 to 5 working days | All versions | ||||
![]() | Hose clamps with band width 9 mm, W5 stainless steel A47 versions | from 1,16 EUR per piece | 3 to 5 working days | All versions | ||||
Choosing clamps for hose and pipe correctly
Hose clips by material class
For worm-drive hose clips to DIN 3017, the material class describes what the band, housing and screw are made of. W1 is made entirely of galvanised steel; in W2 the band and housing are made of 1.4016 and the screw of galvanised steel; W3 is made entirely of 1.4016. W4 is made entirely of stainless steel 1.4301 (A2), W5 entirely of 1.4401 (A4) or 1.4571. A2 can show surface rust in salt water and salt-laden air, so choose W5 near salt water. On the W4 clips with a band width of 12 mm, the stainless steel screw is additionally coated with zinc so that it slides better. With clips of other origin, watch out for screws made of plain steel. If a clip shows brown discolouration, replace it.
Size and fit
Choose the clamping range so that the outside diameter of the hose lies within it. A clip that is too large presses the hose flat at the screw. The clip sits entirely on the hose tail, never over its end. The ABYC standard requires double clips on exhaust lines and fuel filler hoses, and on exhaust hoses also clips made entirely of stainless steel with a band width of at least 12 mm. If you fit two clips, the hose tail needs room for both, with the screws opposite each other. Do not tighten with a cordless screwdriver on a high setting, as this damages the hose. Swing bolt clamps join and seal pipes and hoses with a high tightening torque; the torque is stated for each version. Bend over protruding band ends or cover them, as long ends easily cause cuts.
Pipe clamps and retaining clips
Pipe clamps as half shell or full shell fasten pipes to posts and walls; double clamps are available fixed or with swivel. Retaining clips to DIN 3016 fasten pipes, hoses and cables. The rubber insert separates clip and pipe; such insulation made of rubber or plastic prevents contact corrosion between different metals. You will find the matching hoses under Hoses, fittings under Fittings.








