from 49,39 EUR

Stainless Steel Ash Wood Clothes Hook, Coat Hook with Cap Made to Measure

Item no.:KB85KAP-Esche
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
Ball bonding:
▾
Screws:
▾
Ø wall plug:
▾
S-hooks:
▾
49,39 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless Steel and Wood Coat Hook, Clothes Hook in Ash with Cap, Made to Measure

Our coat hooks are made by true hand craftsmanship, 100 % made in Germany.
Every piece impresses with high-quality materials and precise workmanship.

Product details, set consisting of:

  • 1 x solid ash wood rod, Ø 33.7 mm

  • 1 x V2A stainless steel cap as a high-quality end finish, with 2.5 mm overhang, incl. grub screw for a secure hold

  • 1 x stainless steel wall flange, Ø 70 mm, with 3 holes of 6.5 mm each

  • Fixing screws and wall plugs (optional, see selection)

Special advantages:

Robust combination of stainless steel and ash wood for a modern and durable design
Timeless, high-quality design

Note:

The product image shows the version in ash. Please note that your finished product may differ in colour and grain, as wood is a natural product. 

Coat hook in ash: features and use

A coat hook made to measure: a solid ash wood rod of 33.7 mm projects horizontally from the wall, held by a stainless steel wall flange. At the end, a stainless steel cap with 2.5 mm overhang keeps the coat hangers in place. Wood dampens the rattling of the hangers and gives a homely look.

The wood: ash

Ash is light, almost creamy white to light brown, with a strong, lively grain. The wood is tough and elastic, and with a density of around 690 kg/m³ it is hard and durable; this is why ash has traditionally been used for tool handles and sports equipment. As a clothes rail it looks fresh and natural and suits light, Scandinavian interiors.

Every piece is naturally grown; colour and grain differ from the photo. See all wood types compared at the clothes rails in stainless steel and wood.

How many hangers fit on it

Allow about 5 to 8 cm for each hanger with a jacket, and up to 10 cm for winter coats. A hook with a length of 30 cm therefore holds three to six jackets. The hook of 33.7 mm suits standard hangers whose hook opens to around 35 mm on the inside.

Typical applications

  • Cloakroom in narrow hallways where there is not enough width for a rail
  • Guest cloakroom beside the front door
  • Dressing area and bedroom for the next day's clothes
  • Hotel, surgery and office

Installation

Consider the leverage: the longer the hook, the greater the force on the upper screws. Long hooks belong in concrete or solid brick; in plasterboard, screw into the studs of the substructure. A cover rosette, where included with the item, is fixed after installation with a little silicone or hot glue. For jackets, mount the hook at a height of about 160 to 180 cm, and place several side by side with a spacing of 15 to 25 cm.

All versions

VersionArticle number
Stainless steel with 20 mm solid ballKB85
Stainless steel with capKB85KAP
Maple with capKB85KAP-Ahorn
Beech with capKB85KAP-Buche
Oak with capKB85KAP-Eiche
Ash with cap (this page)KB85KAP-Esche
Spruce with capKB85KAP-Fichte
Kambala with capKB85KAP-Kambala
Pine with capKB85KAP-Kiefer
Cherry with capKB85KAP-Kirsche
Walnut with capKB85KAP-Nussbaum
Stainless steel with pinKB85Pin

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
Email: info@steel-deal.de