7,39 EUR

Stainless steel plug 60.3 x 2 mm domed knurled through hole Ø12.2 solid material

Item no.:S202
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
7,39 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless steel plug, 1 piece

  • Suitable for stainless steel tube 60.3 × 2 mm
  • Through hole Ø 12.2 mm, centred
  • With knurling
  • Design: domed
  • Solid material, very sturdy
  • Surface: finely turned
  • Installation: knocked onto the tube
  • Made in Germany

Stainless steel plugs: features and use

A plug closes an open tube end permanently and neatly. It takes the sharpness off the cut edge, keeps dust and water out of the tube and gives handrails, clothes rails and balustrades a finished end. Our plugs are turned from solid material and are driven into the tube.

Head shape

  • flat: flush, calm finish with a clean edge
  • domed: slightly rounded, comfortable on handrails and in passageways
  • half-round: clearly domed, emphasises the tube end and feels good in the hand

Hold in the tube

A knurling on the shank presses into the inner wall of the tube as it is driven in, while a lamella springs and holds by clamping force. Both hold without adhesive. Outdoors, a drop of epoxy adhesive additionally seals the joint.

Special designs

  • with M8 thread: for screwing on a ball, a hook or a threaded rod
  • with through hole: for rods, ropes or cables routed through the tube end

Typical applications

  • Ends of handrails and balustrade rails
  • Clothes rails projecting beyond the brackets
  • Posts, fence tubes and frames made of round tube
  • Furniture and shop fitting with stainless steel tube

Driving in without scratches

Deburr the tube edge on the inside, position the plug straight, place a piece of wood or a folded cloth on top and drive it in with a rubber mallet. A steel hammer used directly on the stainless steel leaves marks.

Fit

This plug fits stainless steel tube 60.3 x 2 mm. It sits in the inside diameter of 56.3 mm (outside diameter minus twice the wall thickness). When using existing tubes, check the wall thickness: in a tube with a thinner wall the plug will sit too loosely.

All designs

DesignArticle number
domed, knurledS201
domed, knurled, through hole Ø 12.2 mm (this page)S202
domed, knurled, M8 threadS204
flat, knurledS207

Plugs are also available for the tubes 16 x 1 mm, 21.3 x 2 mm, 26.9 x 2 mm, 33.7 x 2 mm, 42.4 x 2 mm, 48.3 x 2 mm; all under Plugs and end caps.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de