6,89 EUR

Stainless steel plug 60.3 x 2 flat knurled solid material

Item no.:S207
Status:Available, expected to ship from 26.11.2026
Delivery time:3 to 5 working days
6,89 EUR
incl. 19% VAT plus shipping
  • Made in Germany since 2009
  • Fast shipping

Description

Stainless steel plug, 1 piece

  • Suitable for stainless steel tube 60.3 × 2 mm
  • With knurling
  • Design: flat
  • Solid material, very sturdy
  • Surface: finely turned
  • Installation: knock onto the tube
  • Manufacture: in Germany

Stainless steel plugs: features and applications

A plug closes an open tube end cleanly and permanently. It takes the sharpness off the cut edge, keeps dust and water out of the tube and gives handrails, clothes rails and railings a finished end. Our plugs are turned from solid material and are knocked into the tube.

Head shape

  • flat: flush, calm finish with a clean edge
  • domed: slightly rounded, pleasant on handrails and in passageways
  • half-round: clearly domed, emphasises the tube end and sits well in the hand

Hold in the tube

A knurling on the shaft presses into the inner wall of the tube as it is knocked in, a lamella springs and holds by clamping force. Both hold without adhesive. Outdoors, a drop of epoxy adhesive provides additional sealing.

Special versions

  • with M8 thread: for screwing on a ball, a hook or a threaded rod
  • with through hole: for rods, ropes or cables that are routed through the tube end

Typical applications

  • Ends of handrails and railing rails
  • Clothes rails projecting beyond the brackets
  • Posts, fence tubes and frames made of round tube
  • Furniture and shopfitting with stainless steel tube

Knocking in without scratches

Deburr the inside of the tube edge, position the plug straight, place a piece of wood or a folded cloth on top and knock it in with a rubber mallet. A steel hammer directly on the stainless steel leaves marks.

Fit

This plug fits stainless steel tube 60.3 x 2 mm. It sits in the inside diameter of 56.3 mm (outside diameter minus twice the wall thickness). With existing tubes, check the wall thickness: in a tube with a thinner wall the plug will fit too loosely.

All versions

VersionArticle number
domed, knurledS201
domed, knurled, through hole Ø 12.2 mmS202
domed, knurled, thread M8S204
flat, knurled (this page)S207

Plugs are also available for the tubes 16 x 1 mm, 21.3 x 2 mm, 26.9 x 2 mm, 33.7 x 2 mm, 42.4 x 2 mm, 48.3 x 2 mm; all under Plugs and end caps.

Product and safety information Steel Deal

Manufacturer: Steel-Deal UG (haftungsbeschränkt)
Country of origin: Germany
E-mail: info@steel-deal.de