
Stainless steel, beech wood clothes rail, concealed screw fixing
max 1700 mm
- Made in Germany since 2009
- Made to measure to order
- Fast shipping
How to determine the order size

Measure the clear inside dimension from wall to wall. This inside dimension is exactly your order size; please enter it in millimetres.
Description
Beech clothes rail with concealed stainless steel fixing
A beech wooden rod with a diameter of 33.7 mm, mounted from wall to wall, with the stainless steel V2A fixing receding visually. No screw is visible from the front. Made to your measurements in our workshop in Germany.
The wood: beech
Beech is light, yellowish to delicately reddish and has a very even grain with fine pores. With a density of around 720 kg/m³ it is hard and dense, dimensionally stable in living spaces and resistant to dents. Beech is the classic for clothes rails and the wood that distracts least from the overall look.
Every rod is naturally grown; colour and grain differ slightly from the photo and from rod to rod. You can compare all nine wood types in the range of clothes rails in stainless steel and wood.
Concealed fixing
A stainless steel wall connector is screwed to each wall, the rail is slid on and secured with a grub screw. The grub screws can be aligned towards the rear. Both connectors must sit at the same height and exactly opposite each other; mark the height with a spirit level or laser. Select suitable screws 6 × 60 mm or 8 × 80 mm above, and wall plugs of 8 or 10 mm.
Clothes hangers
The hook of a standard clothes hanger has an inner opening of around 35 mm. On the 33.7 mm tube it therefore sits steadily without tipping, and still glides easily.
Wood and length
Wood is softer than steel: under the same load, a solid wooden rod of 33.7 mm deflects about six to seven times as much as a stainless steel tube of the same diameter. The length of wooden rails is therefore limited to shorter spans than with stainless steel; the possible dimensions are shown in the order field. For very long alcoves with heavy winter coats, stainless steel is the stiffer choice.
How to measure correctly
The order dimension is the outer dimension: the distance from wall to wall at the height where the rail is to sit, including flanges. Measure at the front and at the back, as alcoves are rarely exactly parallel, and state the smaller dimension. Tiles, skirting boards or plaster edges must be included in the measurement. We cut the tube so that tube and flanges together give exactly your dimension.
Example: your alcove measures 80.3 cm. Then you order 80.3 cm.
Installation and substrate
In concrete and solid brick, expansion anchors hold very well. In perforated brick and aerated concrete, long anchors or injection anchors grip better; in plasterboard, screw into the studs of the substructure or use metal cavity fixings. Drill the hole deeper than the anchor length by the anchor diameter. You can select stainless steel screws and anchors directly above.
Wood in everyday use
Wood moves and absorbs moisture. In living rooms, hallways and dressing areas this is not a problem. Wooden rails should not be installed in the direct splash zone of a shower or bath, or outdoors. A dry or slightly damp cloth is sufficient for cleaning. Every rod is naturally grown; colour and grain differ slightly from the photo and from rod to rod.
Product and safety information Steel Deal
Manufacturer: Steel-Deal UG (haftungsbeschränkt)Country of origin: Germany
Email: info@steel-deal.de
Frequently asked questions
Wie messe ich das richtige Bestellmaß für meine Garderobenstange?
Das Bestellmaß ist das Außenmaß Ihrer Garderobenstange inklusive Wandflansche. Geben Sie beim Bestellen dieses Maß an, wir passen die Rohrlänge automatisch an. Bei Unsicherheiten helfen wir Ihnen gerne weiter.